HySecurity SlideDriver 200-C Correctional Industrial Hydraulic Automatic Slide Gate Opener

The SlideDriver 200-C Industrial Slide Gate Operator is for gates weighing up to 20,000 lbs. This is a correctional model that includes additional control wiring that is compatible with interlocks and options used at correctional facilities. Hydraulic automation allows for continuous cycles and for frequent operation. The Smart Touch Controller provides intuitive control and simplifies configuration.
Part Number: 444CXST

$27,470.95 each

* Required Fields


$27,470.95 each

Details

HySecurity SlideDriver 200-C Correctional Industrial Hydraulic Automatic Slide Gate Opener

The SlideDriver 200-C is a correctional facility SlideDriver with advanced features such as additional control wiring, multiple relays, and three high-security lock options. The extra heavy 10-gauge steel cover adds more protection for restricted areas. This is the right choice if you are looking for one of the highest security slide gate openers. The correctional SlideDriver can move gates with a max weight of 20,000 pounds and is only limited by weight. This gate opener is one of the fastest available, moving 20,000-pound gates for 1 foot per second. There are two voltage options: 208/230V 60HZ (1 Phase) or 208/230/460V 60HZ (3 Phase). If you need a 50HZ option, contact us at (888) 378-1127 for a customized order.

Key Features:

  • Duty Cycle: Continuous
  • Horsepower: 5 HP
  • Drive: Hydraulic
  • Drive Wheels: Two 8-Inch AdvanceDrive Wheels And Two 8-Inch XtremeDrive Wheels With A 52 Ft Rack
  • Gate Weight Max: 20,000 Lb
  • Gate Length Max: Limited Only By Weight
  • Drawbar Pull: 1,200 Lb
  • Rate of Travel: 1Ft/S
  • Temperature Rating: -40° To 158° F
  • 1 Phase Power: 208/230V 60HZ
  • 3 Phase Power: 208/230/460V 60HZ
  • Communication: RS-232, RS-485
  • User Controls: Smart Touch Controller With 70+ Configurable Settings That Can Be Programmed With Keypad Or Using S.T.A.R.T Software
  • Relays: Three Configurable User Relays: One 30VDC, 3A Solid State And Two 250VAC, Or 10A Electromechanical; Optional Hy8Relay For 8 Additional Relay Outputs
  • Finish: Zinc Plated With Powder Coating
  • Listed to UL235: Usage Class III And IV
  • Warranty: 5 Year
  • Includes Pre-Wired Hy2NC Adapter
Note: SlideDriver operators require XtremeDrive 25 inch Rack Kit installation for operation. Each kit includes 25 inches of XtremeDrive Rack. Compare this to the length of the desired gate to decide on the necessary number of rack kits.
SKU 444CXST
Components 444 CX ST
Operator Type SlideDriver
Gate Opener Series SlideDriver 200
UL 325 Usage Class Class III, Class IV
Max. Gate Weight 20,000 lbs.
Wheel Type AdvanceDrive Wheel, XtremeDrive Wheel
Options Correctional
Operator HP 5 HP
Operating Speed 1 Feet Per Second
Manufacturer Nice | HySecurity


You may also be interested in the following product(s)