HySecurity SlideDriver 200 UPS Industrial Hydraulic Automatic Slide Gate Opener With Battery Backup

The SlideDriver 200 UPS Industrial Slide Gate Opener is for gates weighing up to 20,000 lbs. This unit comes in two parts: the SlideDriver 200 UPS and the DC Power Supply 150. Hydraulic automation for continuous cycles allows for frequent operation. The Smart Touch Controller provides intuitive control and simplifies configuration. A durable 12-gauge Steel Chassis protects and contains all internal machinery. This UPS model contains a UPS backup power supply in case of AC Power failure.
Part Number: SLIDEDRIVER200-HV

$34,769.49 each
 

* Required Fields


$34,769.49 each

Details

HySecurity SlideDriver 200 UPS Industrial Hydraulic Automatic Slide Gate Opener With Battery Backup

The HySecurity SlideDriver 200 UPS is an industrial slide gate operator designed and manufactured by HySecurity. This opener has two parts: the SlideDriver 200 UPS and the DC Power Supply 150. This operator can support and mobilize gates up to 20,000 pounds on a continuous-duty hydraulic cycle. Hydraulic motors control the compressed polyurethane AdvanceDrive wheels used to drive the gate. The strong 12-gauge steel chassis contains and protects all internal mechanisms of the operator. The 200 UPS model contains an Uninterruptible DC Power Supply that provides power to the unit upon AC power loss. This operator is fast, moving gates at 1 foot per second. There are two voltage options: 115V 60HZ (1 Phase) or 208-230V 60HZ (1 Phase). If you need a 50HZ option, contact us at (888) 378-1127 for a customized order.

Key Features:

  • Duty Cycle: Continuous
  • Horsepower: 4 HP
  • Drive: Hydraulic
  • Drive Wheels: Two 8-Inch AdvanceDrive Wheels, Two 8-Inch XtremeDrive Wheels, And 52Ft Rack
  • Gate Weight Max: 20,000 Lb
  • Gate Length Max: Limited Only By Weight
  • Drawbar Pull: 1,200 Lb
  • Rate of Travel: 1Ft/S
  • Temperature Rating: -40° To 158° F
  • 1 Phase Power: 115V 60HZ Or 208-230V 60HZ
  • Communication: RS-232, RS-485
  • User Controls: Smart Touch Controller With 70+ Configurable Settings That Can Be Programmed With Keypad Or Using S.T.A.R.T Software
  • Relays: Three Configurable User Relays: One 30VDC, 3A Solid State And Two 250VAC, Or 10A Electromechanical; Optional Hy8Relay For 8 Additional Relay Outputs
  • Finish: Zinc Plated With Powder Coating
  • Listed to UL235: Usage Class III And IV
  • Warranty: 5 Year
  • Includes Pre-Wired Hy2NC Adapter
Note: SlideDriver operators require XtremeDrive 25 inch Rack Kit installation for operation. Each kit includes 25 inches of XtremeDrive Rack. Compare this to the length of the desired gate to decide on the necessary number of rack kits. 115V DC Power Supply requires a 30A branch circuit. Make sure to pick the correct voltage, as chargers are not field convertible.
SKU SLIDEDRIVER200-HV
Components 444 DX ST, DCPS-150
Operator Type SlideDriver
Gate Opener Series SlideDriver 200
UL 325 Usage Class Class III, Class IV
Max. Gate Weight 20,000 lbs.
Wheel Type AdvanceDrive Wheel, XtremeDrive Wheel
Options UPS
UPS Battery Backup Yes
Operator HP 5 HP
Operating Speed 1 Feet Per Second
Manufacturer Nice | HySecurity


You may also be interested in the following product(s)