Note: SlideDriver operators require XtremeDrive 25 inch Rack Kit installation for operation. Each kit includes 25 inches of XtremeDrive Rack. Compare this to the length of the desired gate to decide on the necessary number of rack kits.
- Model: SlideDriver 80-M UPS
- Part #: SLIDEDRIVER80-M-LV
- Duty Cycle: Continuous
- UPS Battery Voltage: 115V 60/50Hz
- Horsepower: 2 hp
- Drive: Hydraulic
- Drive Wheels: One 8 inch (20 cm) AdvanceDrive wheel, One 8 inch XtremeDrive wheel and 27 ft (8 m) of rack
- Gate Weight Max: 8,000 lbs
- Gate Length Max: Limited only by weight
- Drawbar Pull: 600 lb
- Rate of Travel: 1ft/s
- Temperature Rating: -40º F to 158º F No heater necessary
- 1 Phase Power: 208/230V 60 Hz; 220V 50 Hz***
- 3 Phase Power: 208/230/460V or 575V 60Hz; 220/380/440V 50Hz***
- Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory
- User Controls: Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. software.
- Relays: Three configurable user relays:
- one 30VDC
- 3A solid state and two 250VAC
- 10A electromechanical
- Optional Hy8Relay for 8 additional relay outputs
- Finish: Zinc plated with powder coating
- Listed to UL235: Usage Class III, IV
- Warranty: 5 year
- Hy5B™ intelligent vehicle detectors
- Hy8Relay™ - extended relay module provides eight additional programmable relay outputs
- HyNet™ gateway for communicating gate system and accessory status in real time via ethernet/fiber.
- Photo eye
- 12 in (30 cm) base extension
- Tamper proof heavy gauge cover
- T-Lock, lock kit
- Solenoid lock
- Fire emergency access lock box
- Snowbrush and scraper kit
- XtremeDrive Rack Kit
- Custom color
- Strobe light
* 3,000 ft/hr expected duty cycle. The operator’s normal duty cycle and the actual number of gate cycles available from battery depends upon gate resistance to travel, cycle length, battery size, state of charge, and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.
** SlideDriver 200 UPS has a 2,000 ft/hr expected duty cycle. Actual duty cycle depends on site specific conditions and gate configuration.
*** Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø, which are special order.
† 115V DC Power Supply requires a 30A branch circuit. Choose voltage with care as chargers are not field convertible.
|Usage Class||III, IV|
|Max. Gate Weight||8,000 lbs.|
|Operator HP||2 HP|
|Operating Speed||1 ft/s|
|Manufacturer||HySecurity Gate Operators, Inc.|