Hysecurity SwingRiser HRG220CST 30 Hydraulic Industrial Swing Gate Opener

SwingRiser 30 is capable of cycling a 3,000 lb gate in 30 seconds. Continuous cycling powered by hydraulic automation. 80 inch SwingRiser posts are highly configurable allowing for a perfect fit for any situation. Easy configuration and control with Smart Touch Controller. Contains Uninterruptible Power Supply in case of AC power failure.
Part Number: HRG220CST

$23,440.76 each
OR
 

Details

Hysecurity SwingRiser HRG220CST 30 Hydraulic Industrial Swing Gate Opener

The SwingRiser 30 is an industrial swing gate operator designed and manufactured by HySecurity. SwingRiser 30 is capable of elegant cycling of gate leaves weighing up to 3,000 lb in just 30 seconds. Graceful and elegant gate operation is powered by hydraulic drive. SwingRiser posts are 80 inches tall, and can be configured to be left/right handed and inward/outward swinging. Separate HydraSupply located within 100 ft of the operator contains hydraulic power supply and Smart Touch Controller.

Features:

  • Model: SwingRiser 30
  • Part #: HRG220CST
  • Duty Cycle: Continuous
  • Horsepower: 1hp
  • Drive: Hydraulic
  • Gate Length Max: up to 16 ft wide
  • Gate Weight Max: 3,000 lb
  • Open/Close Time: 30 seconds
  • Temperature Rating: -40° to 158° F (-40° to 70° C) No heater necessary
  • 1 Phase Power: 115/208/230V 60Hz; 110/220V 50Hz **
  • 3 Phase Power: 208/230/460V or 575V**; 60Hz, 220/380/440V 50Hz
  • Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet Gateway accessory
  • User Controls: Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. Software.
  • Relays: Three configurable user relays: One 30VDC, 3A solid state and two 250VAC, 10A electromechanical, Optional Hy8Relay for 8 additional relay outputs
  • Finish: Zinc flame sprayed
  • Enclosure: HydraSupply: Type 3R, 30w x 42h x 12d inch (76w x 107h x 30.5d cm)
  • ETL Listed (UL325): Usage Class I, II, III, IV
  • Warranty: 5 year

Optional Accessories:

*The operator's normal duty cycle and the actual number of gate cycles available from battery depends upon gate resistance to travel, cycle length, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.

** Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø, which are special order.

115V requires a 30A branch circuit. Choose voltage with care as chargers are not field convertible.

SwingRiser Specification Sheet SwingRiser Operation Manual
SKU HRG220CST
Manufacturer Nice | HySecurity
Operator Type SwingRiser
UL 325 Usage Class Class I, Class II, Class III, Class IV
Max. Gate Weight 3,000 lbs.
Max. Gate Length 16 ft
Operator HP 1 HP
Open/Close Time 30 Sec.


You may also be interested in the following product(s)