HySecurity Single Channel Remote Receiver, 300MHz - MX001181

Remote receiver, 1 channel, 300MHz, includes antenna and 3 ft cable.
Part Number: MX001181
$80.61 each
$80.61 each
OR
 

Details

HySecurity Single Channel Remote Receiver, 300MHz - MX001181

The HySecurity Single Channel Remote Receiver is a dual frequency, 4-wire, 12-24 volt AC or DC powered gate opener receiver. The operator supplies 12-24 volt power to the receiver, or a separate AC power transformer or DC power supply can power the receiver. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals. It is 300 MHz multi-code and 310 MHz Stanley. Designed for gate openers, it includes an 11-inch wire whip antenna with a Type-F connector for local reception. Also included is 3-foot of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver. The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.

The Model 109950 is compatible with Multi-Code and Stanley transmitters only.


Features

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1,024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
  • Dimensions: 3.625" W x 5.25" H x 1.5" D
Prefer to Call? (888) 378-1127

Questions about part number MX001181?

Required Fields *

Name *

Email *

Phone

My Questions *

SKU MX001181
Manufacturer Nice | HySecurity
Accessory Type Receiver