HySecurity SlideDriver 15-M w/ Battery Backup (UPS) - Slide Gate Opener

The SlideDriver 15-M UPS Industrial Slide Gate Operator is for gates weighing up to 1,500 lbs. This unit has three component parts: the SlideDriver 15-M UPS Drive Unit, the SlideDriver 15-M UPS Power Unit, and the DC Power Supply 60. Hydraulic automation for continuous cycles allows for frequent operation. The Smart Touch Controller provides intuitive control and simplifies configuration. The modular model alters the positioning of internal components to accommodate unique mounting. This unit also contains a UPS backup power supply in case of AC Power failure.

Note: This modular gate opener requires a Drive Unit, a HydraSupply Unit, and ONE of the two DC Power Supply options.

1

HySecurity Swing Gate Replacement Parts

HySecurity SlideDriver 15-M Modular Industrial Hydraulic Automatic Slide Gate Opener - SLIDE-DRIVER-15-M-UPS

HySecurity DC 3/4 ‑ 1 HP Power Supply 115 VAC for Automatic Gate Openers

Part: DCP1111

$8,647.25 each
$8,647.25 each
HySecurity SlideDriver 15-M Modular Industrial Hydraulic Automatic Slide Gate Opener - SLIDE-DRIVER-15-M-UPS

HySecurity DC 3/4 ‑ 1 HP Power Supply 208/230 VAC for Automatic Gate Openers

Part: DCP1211

$8,647.25 each
$8,647.25 each
HySecurity SlideDriver 15-M Modular Industrial Hydraulic Automatic Slide Gate Opener - SLIDE-DRIVER-15-M-UPS

HySecurity HydraSupply 1 HP Power Supply for SlideDriver 15 M UPS Automatic Slide Gate Opener

Part: S-HSP-1-26

$7,459.87 each
$7,459.87 each
HySecurity SlideDriver 15-M Modular Industrial Hydraulic Automatic Slide Gate Opener - SLIDE-DRIVER-15-M-UPS

HySecurity 1 HP Drive Unit for SlideDriver M Automatic Slide Gate Openers

Part: S-MSD-1-E4

$5,781.26 each
$5,781.26 each

Details

HySecurity SlideDriver 15-M w/ Battery Backup (UPS) - Slide Gate Opener

The HySecurity SlideDriver 15-M UPS is an industrial slide gate operator designed and manufactured by HySecurity. This opener has three parts: the SlideDriver 15-M UPS Drive Unit, the SlideDriver 15-M UPS Power Unit, and the DC Power Supply 60. This operator can support and mobilize gates up to 1,500 pounds on a continuous-duty hydraulic cycle. Hydraulic motors control the compressed polyurethane AdvanceDrive wheels used to drive the gate. The strong 12-gauge steel chassis contains and protects all internal mechanisms of the operator. This modular model positions the motor, hydraulic pump, and electric controls in a remote enclosure for unique mounting purposes. The 15-M UPS model contains an Uninterruptible DC Power Supply that provides power to the unit upon AC power loss. This operator is fast, moving gates at 1 foot per second. There are two voltage options: 115V 60HZ (1 Phase) or 208-230V 60HZ (1 Phase). If you need a 50HZ option, contact us at (888) 378-1127 for a customized order.

Note: This modular gate opener requires a Drive Unit, a HydraSupply Unit, and ONE of the two DC Power Supply options.

Key Features:

  • Duty Cycle: Continuous
  • Horsepower: 2 HP
  • Drive: Hydraulic
  • Drive Wheels: Two 6-Inch AdvanceDrive Wheels
  • Gate Weight Max: 1,500 Lb
  • Gate Length Max: Limited Only By Weight
  • Drawbar Pull: 300 Lb
  • Rate of Travel: 1Ft/S
  • Temperature Rating: -40 Degrees To 158 Degrees F
  • 1 Phase Power: 115V 60HZ Or 208-230V 60HZ
  • Communication: RS-232, RS-485
  • User Controls: Smart Touch Controller With 70+ Configurable Settings That Can Be Programmed With Keypad Or Using S.T.A.R.T Software
  • Relays: Three Configurable User Relays: One 30VDC, 3A Solid State And Two 250VAC, Or 10A Electromechanical; Optional Hy8Relay For 8 Additional Relay Outputs
  • Finish: Zinc Plated With Powder Coating
  • Listed to UL235: Usage Class I, II, III And IV
  • Warranty: 5 Year
  • Includes One Premium EMX IRB-MON Photo Eye, One 5-Foot Premium ASO Edge Sensor And A Pre-Wired Hy2NC Adapter
Note: SlideDriver operators require XtremeDrive 25 inch Rack Kit installation for operation. Each kit includes 25 inches of XtremeDrive Rack. Compare this to the length of the desired gate to decide on the necessary number of rack kits. 115V DC Power Supply requires a 30A branch circuit. Make sure to pick the correct voltage, as chargers are not field convertible. Read More
Prefer to Call? (888) 378-1127

Questions about part number SLIDE-DRIVER-15-M-UPS?

Required Fields *

Name *

Email *

Phone

My Questions *

SKU SLIDE-DRIVER-15-M-UPS
Gate Opener Series SlideDriver 15
Finish Powder-Coated
UL 325 Usage Class Class I, Class II, Class III, Class IV
Max. Gate Weight 1,500 lbs.
Wheel Type AdvanceDrive Wheel
Options Modular
Operator HP 2 HP
Operating Speed 1 Feet Per Second