HySecurity SlideDriver 50VF2/3-C Correctional Fast Variable Frequency Industrial Hydraulic Slide Gate Opener

The SlideDriver 50VF2/3-C Industrial Slide Gate Operator is designed for correctional facilities and is for gates weighing up to 5,000 lbs. It features hydraulic automation for continuous cycles allows for frequent operation and Smart Touch Controller provides intuitive control and simplifies configuration. The corrections model includes additional control wiring necessary for high-security locations.
Part Number: 222CX3ST-HV

$13,759.08 each

* Required Fields


$13,759.08 each

Details

HySecurity SlideDriver 50VF2/3-C Correctional Fast Variable Frequency Industrial Hydraulic Slide Gate Opener

The SlideDriver 50VF2/3-C is a correctional facility SlideDriver that has advanced features such as additional control wiring, multiple relays, and three high-security lock options. The extra heavy 10-gauge steel cover adds more protection for restricted areas. This is the right choice if you are looking for one of the highest security slide gate openers. The correctional SlideDriver can move gates with a max weight of 5,000 pounds and is only limited by weight. This gate opener is one of the fastest available, moving 5,000-pound gates for 2.2 feet per second or 3 feet per second. There are three voltage options: 208/230V 50/60HZ (1 Phase), 208/230V 50/60HZ (3 Phase), or 380/460V 50/60HZ (3 Phase). This is a field adjustable unit that can be used in either 50HZ or 60HZ.

Key Features:

  • Duty Cycle: Continuous
  • Horsepower: 2 HP
  • Drive: Hydraulic
  • Drive Wheels: Two 8-Inch AdvanceDrive Wheels
  • Gate Weight Max: 5,000 Lb
  • Gate Length Max: Limited Only By Weight
  • Drawbar Pull: 300 Lb
  • Rate of Travel: 2.2Ft/S Or 3 Ft/S
  • Temperature Rating: -40° To 158° F
  • 1 Phase Power: 208/230V 60HZ
  • 3 Phase Power: 208/230V 60HZ Or 380/460V 60HZ
  • Communication: RS-232, RS-485
  • User Controls: Smart Touch Controller With 70+ Configurable Settings That Can Be Programmed With Keypad Or Using S.T.A.R.T Software
  • Relays: Three Configurable User Relays: One 30VDC, 3A Solid State And Two 250VAC, Or 10A Electromechanical; Optional Hy8Relay For 8 Additional Relay Outputs
  • Finish: Zinc Plated With Powder Coating
  • Listed to UL235: Usage Class III And IV
  • Warranty: 5 Year
  • Includes EMX IRB-MON Photo Eye And A 5-Foot Premium ASO Edge Sensor With Pre-Wired Hy2NC Adapter
Note: SlideDriver operators require XtremeDrive 25 inch Rack Kit installation for operation. Each kit includes 25 inches of XtremeDrive Rack. Compare this to the length of the desired gate to decide on the necessary number of rack kits.
SKU 222CX3ST-HV
Components 222 CX3 ST
Operator Type SlideDriver
Gate Opener Series SlideDriver 50 VF
UL 325 Usage Class Class III, Class IV
Max. Gate Weight 5,000 lbs.
Wheel Type AdvanceDrive Wheel
Options Correctional
Operator HP 2 HP
Operating Speed 2.2 Feet Per Second
Manufacturer Nice | HySecurity