HySecurity SlideDriver 80 Industrial Hydraulic Slide Gate Opener

The SlideDriver 80 Industrial Slide Gate Operator is for gates weighing up to 8,000 lbs. Hydraulic automation lets continuous cycles occur with frequent operation. The Smart Touch Controller provides intuitive control and simplifies configuration. A durable 12-gauge Steel Chassis protects and contains all internal machinery. This is a gate opener created for heavy-duty usage and will last many years.
Part Number: 222X1ST

$12,969.35 each

* Required Fields


$12,969.35 each

Details

HySecurity SlideDriver 80 Industrial Hydraulic Slide Gate Opener

The SlideDriver 80 is an industrial slide gate operator designed and manufactured by HySecurity. This operator can support and mobilize gates up to 8,000 pounds on a continuous-duty hydraulic cycle. Hydraulic motors control the compressed polyurethane AdvanceDrive wheels used to drive the gate. The 12-gauge solid steel chassis contains and protects all internal mechanisms of the operator. This gate opener is one of the fastest slide gate openers in the industry, moving 8,000-pound gates for 1 foot per second. There are two voltage options: 208/230V 60HZ (1 Phase) or 208/230/460V 60HZ (3 Phase). If you need a 50HZ option, contact us at (888) 378-1127 for a customized order.

Key Features:

  • Duty Cycle: Continuous
  • Horsepower: 2 HP
  • Drive: Hydraulic
  • Drive Wheels: One 8-Inch AdvanceDrive Wheel And One 8-Inch XtremeDrive Wheel And 27Ft Rack
  • Gate Weight Max: 8,000 Lb
  • Gate Length Max: Limited Only By Weight
  • Drawbar Pull: 600 Lb
  • Rate of Travel: 1Ft/S
  • Temperature Rating: -40° To 158° F
  • 1 Phase Power: 208/230V 60HZ
  • 3 Phase Power: 208/230/460V 60HZ
  • Communication: RS-232, RS-485
  • User Controls: Smart Touch Controller With 70+ Configurable Settings That Can Be Programmed With Keypad Or Using S.T.A.R.T Software
  • Relays: Three Configurable User Relays: One 30VDC, 3A Solid State And Two 250VAC, Or 10A Electromechanical; Optional Hy8Relay For 8 Additional Relay Outputs
  • Finish: Zinc Plated With Powder Coating
  • Listed to UL235: Usage Class III And IV
  • Warranty: 5 Year
  • Includes EMX IRB-MON Photo Eye And A 5-Foot Premium ASO Edge Sensor With Pre-Wired Hy2NC Adapter
Note: SlideDriver operators require XtremeDrive 25 inch Rack Kit installation for operation. Each kit includes 25 inches of XtremeDrive Rack. Compare this to the length of the desired gate to decide on the necessary number of rack kits.
SKU 222X1ST
Components 222 X1 ST
Operator Type SlideDriver
Gate Opener Series SlideDriver 80
UL 325 Usage Class Class III, Class IV
Max. Gate Weight 8,000 lbs.
Wheel Type AdvanceDrive Wheel, XtremeDrive Wheel
Operator HP 2 HP
Operating Speed 1 Feet Per Second
Manufacturer Nice | HySecurity


You may also be interested in the following product(s)