The SlideSmart HD25 is a heavy-duty slide-gate operator manufactured and designed by HySecurity. This electromechanical model is capable of cycling a 2,500 lb, 50ft gate at an adjustable speed of 0.75/1/or 1.25s (Speed setting cannot be configured to exceed 1 ft/s for Class I and II usage safety). The continuous duty cycle of this operator allows for numerous low maintenance cycles on a daily basis.
*Note: Operator price includes 30 ft (9 m) of #40, corrosion-resistant roller chain, and two steel gate mounting brackets. Also includes one premium EMX IRB-MON photo-eye set and one 5-foot premium ASO edge sensor (with pre-wired Hy2NC adapter).
- Gate Weight Max: 2,500lb
- Gate Length Max: 50ft
- Pull Force*: 450lb
- Rate of Travel: 0.75, 1 or 1.25 ft/s (23, 30 or 38 cm/s) Open/Close speed set independently
- Duty Cycle: Continuous
- Operator Horsepower: 1/2hp
- Drive: Electromechanical
- Uninterruptible Power Supply:
- Standard battery backup gate travel: Two 8Ah batteries. Up to 4,000 ft (1,219 m) after AC power loss. Field configurable to fail open or secure when batteries deplete.
- Extended battery backup gate travel: Two 50Ah batteries. Up to 25,000 ft (7,620 m) after AC power loss. Field configurable to fail open or secure when batteries deplete. Base riser required.
- Temperature Rating: -13ºF to 158ºF (-25ºC to 70ºC) No heater necessary.
- Voltage Input: 115V or 208-230V, 60/50Hz.
- Accessory Power: 12VDC and 24VDC 1A each
- Communication: USB, RS-232, RS-485. Ethernet/fiber using optional HyNet™ Gateway accessory
- User Controls: Smart DC Controller with 70+ configurable settings. 32 character LCD display and 5 tact buttons or a PC using S.T.A.R.T. software.
- Relays: Two configurable user relays: 30VDC, 3A solid state and 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs
- Finish: Zinc rich primer chassis with black powder coated steel cover
- ETL Listed (UL 325): Usage Class I, II, III, IV*
- Cycle Tested: 500,00 Cycles
- Includes: 30 ft. #40 Corrosion-Resistant Roller Chain, EMX IRB-MON Photo-Eye Set, and 5 ft. Premium ASO Edge Sensor
- Warranty: 5-year (7-year single-family residence)
- Hy5B™ intelligent vehicle detectors
- Hy8Relay™ - accessory module provides eight additional programmable relay outputs
- HyNet™ Gateway for communicating gate system and accessory status in real time via Ethernet or fiber
- Extended backup batteries
- Base extension, 12.5” (32 cm), for extended batteries or more conduit space (SlideSmart DC 10F, 15 models)
- Photo eye
- Post mount bracket
- Bolt-on gate chain brackets
- Stainless Steel Chain
- Rodent block plate for SlideSmart DC 10F, 15
*Speed setting cannot be configured to exceed 1 ft/s for Class I and II usage. **Solar panels not supplied by HySecurity ***Not for residential use or applications intended to serve the general public.
**HySecurity manufacturers only reliable and powerful gate operators and provides an extra margin of power to be certain the gate works in adverse conditions. Some manufactures overstate the length and weight capacity of their operators, but HySecurity rates conservatively. Note that our pull force ratings are substantial and that extra margin of power is part of the HySecurity reputation for reliability.
†SlideSmart HD is exceptionally energy efficient, however actual battery backed up gate travel will depend on gate resistance to travel, cycle length, battery health, ambient temperature, accessories drawing battery power and frequency of gate cycles during power outage.
|Operator Type||SlideSmart DC|
|Usage Class||I, II, III, IV|
|Max. Gate Weight||2,500 lbs.|
|Operator HP||1/2 HP|
|Operating Speed||0.75, 1 or 1.25 ft/s|
|Manufacturer||HySecurity Gate Operators, Inc.|