HySecurity SlideSmart HD 25 Heavy-Duty Commercial Slide Gate Opener w/ Battery Backup (2,500 lbs Max.)
Details
HySecurity SlideSmart HD 25 Heavy-Duty Commercial Slide Gate Opener w/ Battery Backup (2,500 lbs Max.)
The HySecurity SlideSmart HD25 is a heavy-duty, electromechanical slide gate operator designed for continuous use in commercial and industrial applications with large gates and high-cycle demands. It supports gates up to 2,500 pounds and 50 feet in length and offers independently adjustable speeds of 0.75, 1.0, or 1.25 feet per second. UL Class I and II applications are speed-limited to 1 ft/s for safety compliance. Built for performance in extreme environments, the HD25 is capable of operating in temperatures as low as -13 degrees F and as high as 158 degrees F without a heater, while the included battery backup ensures secure operation during power loss. Note: Operator package includes 30 ft of #40 corrosion-resistant roller chain, two steel gate mounting brackets, one premium EMX IRB-MON photo-eye set, and one 5-foot premium ASO edge sensor with a pre-wired Hy2NC adapter.
Key Features:
- Heavy-duty slide gate automation for commercial and industrial settings
- Supports gates up to 2,500 lb and 50 ft long
- Adjustable travel speed: 0.75, 1.0, or 1.25 ft/s (limited to 1 ft/s for UL Class I & II)
- Includes Smart DC Controller with 70+ configurable settings and diagnostics tools
- Comes standard with EMX IRB-MON photo-eye and ASO edge sensor for enhanced safety
- Battery backup options maintain reliable operation during power outages
- Weather-resistant design with zinc-rich primer and black powder-coated steel cover
- Operates in temperatures from -13 degrees F to 158 degrees F without a heater
- Tested to 500,000 cycles for long-term durability and low maintenance
- *HySecurity provides substantial pull force and conservative gate ratings to ensure reliable operation under real-world load conditions
Specifications:
- Gate Weight Capacity: 2,500 lb (1,134 kg)
- Gate Length Capacity: 50 ft (15 m)
- Pull Force: 450 lb*
- Rate of Travel: 0.75, 1.0, or 1.25 ft/s (23, 30, or 38 cm/s)
- Speed Limitation: Max 1 ft/s for Class I & II applications
- Horsepower: 1/2 hp
- Drive Type: Electromechanical
- Duty Cycle: Continuous
- Battery Backup - Standard: Two 8Ah batteries (up to 4,000 ft of gate travel)
- Battery Backup - Extended: Two 50Ah batteries (up to 25,000 ft of travel; base riser required)
- Temperature Rating: -13 degrees F to 158 degrees F (-25 degrees C to 70 degrees C)
- Voltage Input: 115V or 208-230V, 60/50 Hz
- Accessory Power: 12VDC and 24VDC, 1A each
- Communication: USB, RS-232, RS-485; Ethernet/fiber via optional HyNet Gateway
- User Controls: Smart DC Controller with LCD, 5 tact buttons, and S.T.A.R.T. software interface
- Relays: Two user-configurable outputs (30VDC 3A solid state & 250VAC 10A electromechanical); optional Hy8Relay supports 8 additional outputs
- Finish: Zinc-rich primer chassis with black powder-coated steel cover
- ETL Listed (UL 325): Usage Class I, II, III, IV
- Cycle Tested: 500,000 cycles
- Warranty: 5 years (7 years for single-family residential use)
Additional Notes:
*Speed must be limited to 1 ft/s for UL Class I and II safety compliance.
**Not intended for residential or public-access installations.
***Pull force ratings reflect HySecurity's conservative engineering and commitment to real-world performance.
Efficiency Disclaimer: While the SlideSmart HD series is designed for high efficiency, actual battery-supported gate travel depends on site-specific factors including cycle length, gate resistance, ambient temperature, battery condition, and accessory draw during outages.
SlideSmart Model Comparison
| Model | SlideSmart DC 10F | SlideSmart DCS 10F | SlideSmart DC 15 | SlideSmart DCS 15 | SlideSmart HD25 | SlideSmart HD30 |
|---|---|---|---|---|---|---|
| Gate Weight Max. | 1,000 lb (453 kg) | 1,000 lb (453 kg) | 1,500 lb (680 kg) | 1,500 lb (680 kg) | 2,500 lb (1,134 kg) | 3,000 lb (1,361 kg) |
| Gate Length Max. | 40 ft (12 m) | 50 ft (15 m) | ||||
| Rate of Travel | 1.75, 2 or 2.25 ft/s (53, 61 or 69 cm/s) | 1.75, 2 or 2.25 ft/s (53, 61 or 69 cm/s) | 0.75, 1 or 1.25 ft/s (23, 30 or 38 cm/s) | 0.75, 1 or 1.25 ft/s (23, 30 or 38 cm/s) | 0.75, 1 or 1.25 ft/s (23, 30 or 38 cm/s) | 0.75, 1 or 1.25 ft/s (23, 30 or 38 cm/s) |
| Duty Cycle | Continuous | |||||
| Horsepower | 1/2 hp | 1 hp | ||||
| Uninterruptible Power Supply |
Standard: 2x 8Ah batteries, up to 4,000 ft (1,219 m) after AC power loss. Extended: 2x 50Ah batteries, up to 25,000 ft (7,620 m) after AC power loss. Field configurable. Base riser required. |
|||||
| Voltage Input | 115V or 208-230V, 60/50 Hz | Solar: 24VDC panels | 115V or 208-230V, 60/50 Hz | Solar: 24VDC panels | 115V or 208-230V, 60/50 Hz | |
| Accessory Power | 12VDC and 24VDC 1A each | |||||
| User Controls | Smart DC Controller with 70+ configurable settings. 32-character LCD display with 5 tact buttons or PC via S.T.A.R.T. software. | |||||
| ETL Listed (UL 325) | Usage Class III, IV*** | Usage Class I, II, III, IV* | Usage Class I, II, III, IV* | |||
| Cycle Tested | 500,000 cycles | |||||
| Warranty | 5 year (7 year single-family residential) | |||||
| SKU | SLIDESMARTHD25 |
|---|---|
| Operator Type | SlideSmart HD |
| Input Voltage | 110/115/120 AC (60Hz, 1 Phase), 220/230/240 AC (60Hz, 1 Phase), 208 AC (60Hz, 1 Phase), 230 AC (50Hz, 1 Phase) |
| UL 325 Usage Class | Class I, Class II, Class III, Class IV |
| Max. Gate Weight | 2,500 lbs. |
| Operator HP | 1/2 HP |
| Operating Speed | 0.75, 1 or 1.25 Feet Per Second |
| Manufacturer | Nice | HySecurity |
| Manual | Download PDF file |
| Specification Sheet | Download PDF file |
You may also be interested in the following product(s)
-
-
-
-
-
Base Extension, SlideSmart DC 10F, 15
$1,042.63 each -
HySecurity Post Mount Kit - MX002104
$495.52 each