HySecurity StrongArmCrash Hydraulic Dual-Arm Anti-Ram Barrier Gate - M50
Details
HySecurity StrongArmCrash Hydraulic Dual-Arm Anti-Ram Barrier Gate - M50
The HySecurity ARC StrongArmCrash Hydraulic Dual-Arm Barrier Gate - M50 is a powerful M50 crash-rated barrier gate engineered to protect the most sensitive infrastructure. Certified under ASTM F2656 M50 P2, it stops a 15,000-pound vehicle traveling at 50 mph with just 1.2 meters of penetration. This hydraulic anti-ram barrier gate delivers continuous-duty performance and is trusted in locations like refineries, ports, and defense compounds. Its dual-arm structure reinforces stopping power and expands access lane control. When perimeter security demands maximum resistance, this hostile vehicle mitigation barrier rises to the challenge.
Key Features:
- High-security hydraulic barrier stops 15,000 lb vehicle at 50 mph
- ASTM F2656-07 M50 P2 certified with 1.2 m maximum penetration
- Integrated Smart Touch Controller supports advanced programming
- Compatible with RS-232, Ethernet, and HyNet Gateway communication
- Performs in extreme weather from -40 degrees F to 158 degrees F
Specifications:
- Crash Rating: ASTM F2656-07 M50 P2
- Drive System: Hydraulic, 2 hp motor
- Duty Cycle: 100 cycles/hr, continuous operation
- Open/Close Time: 6-8 seconds (arm dependent)
- Ingress: 90 degrees arm swing
- Power: 208/230V single-phase or 208-480V three-phase
- Foundation: 6'x6'x4' concrete base with #6 rebar
- Finish: Yellow powder coat over galvanized frame
Contact HySecurity to request official ASTM F2656-07 M30 and M50 crash test certifications. The StrongArm M50 model achieved a P2 rating, with vehicle penetration limited to 1.17 meters.
Optional ExtremeCycle configuration available for high-frequency applications.
| SKU | STRONGARMCRASHM50 |
|---|---|
| Operator Type | StrongArmCrash |
| Drive Type | Hydraulic |
| Input Voltage | 220/230/240 AC (60Hz, 1 Phase), 208 AC (60Hz, 1 Phase), 208 AC (60Hz, 3 Phase), 460/480 AC (60Hz, 3 Phase), 230 AC (50Hz, 1 Phase) |
| Operator HP | 2 HP |
Crash Rating
Learn More About Crash Ratings
Learn More
|
M50 |
| Arm Speed | 6 to 8 Sec. |
| Duty Cycle | 100 Cycles Per Hour |
| Manufacturer | Nice | HySecurity |
| Manual | Download PDF file |
| Specification Sheet | Download PDF file |
