HySecurity StrongArmCrash M50 CE Internationally Certified Hydraulic Dual-Arm Anti-Ram Vehicle Barrier Arm
The StrongArmCrash M50 CE is an internationally certified Anti-Ram Vehicle Barrier Arm designed and manufactured by HySecurity. This barrier arm's unique dual-arm design prevents a large truck or small passenger vehicle from breaching security. Capable of stopping a 15,000 lb truck, driving 50mph, in place. Bright LED arm lighting and reflective tape grant increased visibility and prevent accidental impact. The lower arm reduces risk of injury or death from an accidental passenger vehicle impact. Cycles up to 100 times an hour (continuous cycling available). The HySecurity StrongArmCrash M50 is a reliable and advanced security control and defense barrier arm.
*Please Note: Product Pricing Not Available Online. Please Call: (800) 878-7829
- Crash Certified: ASTM F2656-07 M50-P2*
- Duty Cycle: 100 cycles/hr**, option for continuous duty
- Horsepower: 2 hp
- Drive: Hydraulic
- Open/Close Time: 6 to 8 seconds depending on arm length
- Emergency Fast Close Time: 5 to 7 seconds depending on arm length
- Clear Opening: 12 to 24 ft in 2 ft increments (366 to 732 cm in 61 cm increments) Call for custom arm length
- Full Open Angle: 90°
- Ingress Protection: IP56
- Temperature Rating: -40° to 158° F (-40° to 70° C) or -10° to 158° F (-23° to 70° C) using biodegradeable fluid
- 1 Phase Power: 208/230V, 60/50 Hz 20A
- 3 Phase Power: 208/230V, 60/50 Hz, 380/460V, 60/50 Hz
- Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory
- User Controls: Smart Touch Controller with 70+ configurable options. Smart Touch keypad and display or a PC using S.T.A.R.T. software.
- Relays: Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs
- Finish Type: Hot dipped galvanized standard. Optional textured yellow powder coat over zinc plating.
- Foundation: 6 x 6 x 2 ft (183 x 183 x 61 cm) #5 rebar, grade 60
- Electrical Certification: Control panel certified to UL 508 A by ETL
- Warranty: 5-year
- Hy5B™ intelligent vehicle detectors
- Hy8Relay™ - accessory module provides eight additional programmable relay outputs
- HyNet™ Gateway for communicating gate system and accessory status in real time via Ethernet/fiber.
- Secondary Traffic Light
- Mag Lock
*Contact HySecurity to receive a copy of the ASTM F2656-07 M30/M50 Test Certifications. StrongArm M50 received a P2 rating with penetration limited to 1.17 meters.
**ExtremeCycle option available
|Operator HP||2 HP|
|Arm Speed||6 to 8 Sec.|
|Duty Cycle||100 Cycles Per Hour|
|Manufacturer||Nice | HySecurity|
You may also be interested in the following product(s)
HySecurity Traffic Light and Galvanized Pole Assembly For StrongArm CE
HySecurity Heater Kit With Thermostat For StrongArm / SwingRiser, 115VAC
HySecurity Magnetic Lock Kit Assembly For StrongArm M30/M50
HySecurity Relay Module, Hy8Relay, Smart DC