- Model: SwingRiser 19
- Part #: HRG220BST
- Duty Cycle: Continuous
- Horsepower: 1hp
- Drive: Hydraulic
- Gate Length Max: up to 16 ft wide
- Gate Weight Max: 1,600 lb
- Open/Close Time: 19 seconds
- Temperature Rating: -40º to 158º F (-40º to 70º C) No heater necessary
- 1 Phase Power: 115/208/230V 60Hz; 110/220V 50Hz **
- 3 Phase Power: 208/230/460V or 575V**; 60Hz, 220/380/440V 50Hz
- Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory
- User Controls: Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. Software.
- Relays: Three configurable user relays:
- one 30VDC
- 3A solid state and two 250VAC
- 10A electromechanical
- Optional Hy8Relay for 8 additional relay outputs
- Finish: Zinc flame sprayed
- Enclosure: HydraSupply: Type 3R, 30w x 42h x 12d inch (76w x 107h x 30.5d cm)
- ETL Listed (UL325): Usage Class I, II, III, IV
- Warranty: 5 year
- Hy5B™ intelligent vehicle detectors
- Hy8Relay™ - extended relay module provides eight additional programmable relay outputs
- HyNet™ Gateway for communicating gate system and accessory status in real time via Ethernet/fiber.
- Custom post height
- Heater Kit
*The operator’s normal duty cycle and the actual number of gate cycles available from battery depends upon gate resistance to travel, cycle length, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.
** Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø, which are special order.
† 115V requires a 30A branch circuit. Choose voltage with care as chargers are not field convertible.
|Manufacturer||HySecurity Gate Operators, Inc.|
|Usage Class||I, II, III, IV|
|Max. Gate Weight||1,600 lbs.|
|Max. Gate Length||16 ft|
|Operator HP||1 HP|
|Open/Close Time||19 Sec.|
Hysecurity SwingRiser 19 Industrial Swing Gate Operator - HRG220BST
You may also be interested in the following product(s)