HySecurity WedgeSmart DC Parking and Vehicle Theft Protection 45° Wedge With Barrier Arm

Details

HySecurity WedgeSmart DC Parking and Vehicle Theft Protection 45° Wedge With Barrier Arm

The WedgeSmart DC is a certified electromechanical crash wedge with a parking barrier arm designed and manufactured by HySecurity. Engineered for millions of low maintenance cycles, this wedge is designed to prevent a vehicular security breach wherever necessary. Built to withstand impact from a small car traveling at 40 mph or a full-size sedan traveling at 30 mph. Integrated LEDs in allow for increased visibility, preventing accidental impact. The installed kill switch stops arm motion upon impact to protect pedestrians as well as the wedge itself. Internal parts are protected by zinc-plated chassis and white powder coating. HySecurity's WedgeSmart DC is the optimal solution for site clearance issues in locations such as parking garages.

*​Please Note: Product Pricing Not Available Online. Please Call: (800) 878-7829

Features:

• Crash-Engineered: ASTM F2656 SC40: Small Car, 2,430 lb @ 40 mph (1.1 MT @ 64 km/h) ASTM F2656 FS30: Full Size Sedan, 4,630 lb @ 30 mph (2.1 MT @ 48 km/h)
• Lane Widths: 9, 10, 12, 14 ft (2.7, 3, 3.7, 4.3 m)
• Arm Full Open Angle: Arm full open angle: Adjustable 90 ° ± 10 °
• Wedge Design: 45° raised position; 21 inch plate height for 9, 10 ft lane width; 18 inch plate height for 12, 14 ft lane width; manual locking mechanism and rotary crank for manual operation
• Handing: Left or right handing available
• Arm Design:
• Aluminum arm with bumper, lights, HyProtect™ breakaway arm bracket & kill switch, 9, 10 ft (2.7, 3 m)
• Articulating aluminum arm with bumper, HyProtect™ breakaway arm bracket & kill switch; 7 ft clear/8 ft extended (2.1 m/2.4m) 8 ft clear/10 ft extended (2.4 m/3 m) 9 ft clear/11 ft extended (2.7 m/3.4 m) Lights optional.
• Duty Cycle: Continuous
• Uninterrupted Power Supply: Two 12V, 50Ah batteries, Operates for over 150 cycles after AC power loss.* Field configurable to fail open or secure when batteries deplete.
• Voltage Input: 115VAC, 3A, 60/50 Hz, 208-230VAC, 1.5A, 60/50 Hz Solar: 24VDC solar panels**
• Accessory Power: 12VDC and 24VDC 1A each
• Temperature Rating: -13 ° to 158 ° F (-25 ° to 70 ° C)
• Communication: USB, RS-232, RS-485, Ethernet & fiber option using HyNet™ Gateway accessory
• User Controls: Smart DC Controller with 70+ configurable settings, 32 character LCD display and 5 tact buttons or a PC using S.T.A.R.T. software.
• Relays: Two configurable user relays: 30VDC, 3A solid state and 250VAC, 10A electromechanical. Optional Hy8Relay™ for 8 additional relay outputs
• Finish: Zinc plated with white powder coating
• Foundation: To achieve ASTM F2656 rating, 3000 psi flat concrete required. 10 inch min. at anchor strap area. 6 inch min. all other areas. Area under chassis and wedge plate must be flat within 1/4 inch over entire length.
• Electrical Certification: Control panel certified to UL 508A by ETL
• Warranty: 2 years

Optional Accessories:

• Hy8Relay™ - accessory module provides eight additional programmable user relays
• Hy5B™ intelligent vehicle loop detectors
• HyNet™ Gateway for communicating gate system and accessory status in real time via Ethernet/fiber.
• Photo Eye
• Second traffic light for bi-directional lanes
• Lifting strap and eyebolt kit available to assist installation

* Actual UPS cycles depend on accessory power draw, frequency of cycles, battery health, ambient temperature and other conditions

** Solar panels not supplied by HySecurity

Installation Gallery