Details
HySecurity StrongArm Commercial Barrier Gate Opener with Battery Backup (36ft Max Arm)
The HySecurity StrongArm 36 is a specialized hydraulic barrier gate operator engineered to handle oversized access lanes requiring barrier arms up to 36 feet in length. It's the go-to choice for transportation depots, correctional institutions, and large-scale industrial sites where extreme width, high-security access, and operational redundancy are essential. The built-in UPS system supports up to 300 cycles after AC power loss, ensuring uninterrupted protection for critical entry points. With an 8-second open/close time and adjustable 86-degree opening angle, this long arm vehicle barrier solution offers flexibility for varied site geometries. The steel housing, coated in yellow powder over zinc plating, shields the hydraulic core and Smart Touch Controller, which offers over 70 configurable settings. Barrier arm not included.
Note: This modular barrier opener requires a Gate Opener/Power Supply Unit and ONE of the two DC Power Supply options.
Key Features:
- HySecurity StrongArm barrier operator with heavy-duty center yoke mount
- Hydraulic barrier gate system built for long arm vehicle barrier solutions
- Uninterruptible DC Power Supply (UPS) provides up to 300 backup cycles
- StrongArm gate with advanced control logic and Smart Touch technology
- Automatic gate arm operator with rapid 8-second operation for arms up to 36 ft
- Barrier operator for industrial and military sites with oversized access lanes
- Traffic control barrier for secured entry at ports, terminals, and sensitive facilities
- Secure unibody enclosure with 10-gauge welded steel and keyed T-lock
Specifications:
- Max boom arm length: 36 ft (aluminum-fiberglass arm, center yoke mount)
- Opening/closing time: 8 seconds open / 8 seconds close
- Arm motion angle: Adjustable to 86 degrees
- Duty cycle: 2,000 cycles per day
- Drive system: 3/4 HP hydraulic motor
- UPS battery voltage: 115V 60/50 Hz
- Power input (single phase): 115/208/230V 60 Hz or 110/220V 50 Hz
- Power input (three phase): 208/230/460/575V 60 Hz or 220/380V 50 Hz
- Operating temperature: -40 degrees F to 158 degrees F (no heater required)
- Communication: RS-232, RS-485, Ethernet/fiber via optional HyNet Gateway
- User controls: Smart Touch Controller with 70+ configurable settings, PC integration via S.T.A.R.T. software
- Relays: Three configurable (1 solid state, 2 electromechanical), expandable via Hy8Relay
- Finish: Yellow powder-coated zinc-plated steel
- UL listed: Usage Class I, II, III, IV
- Warranty: 5 years
StrongArm Model Comparison
Model |
StrongArm 14F |
StrongArm 20 UPS |
StrongArm 28 UPS |
StrongArm DOT 28 UPS |
StrongArm 36 UPS |
Arm Length Max. |
Up to 14 ft |
Up to 20 ft * Side mount up to 18 ft |
Up to 28 ft * |
Up to 28 ft |
Up to 36 ft* |
Duty Cycle |
2,000 cycles/day* |
Open/Close Time |
2 seconds to open; 3 seconds to close |
3 seconds to open; 4 seconds to close |
5 seconds to open; 6 seconds to close |
5 seconds to open; 6 seconds to close |
8 seconds to open; 8 seconds to close |
UPS Battery Backup Cycles |
Optional 230V AC Power Supply w/HyInverter AC |
DC Power Supply w/HyCharger (up to 300 cycles) |
DC Power Supply w/HyCharger (up to 300 cycles) |
DC Power Supply w/HyCharger (up to 300 cycles) |
DC Power Supply w/HyCharger (up to 300 cycles) |
User Controls |
Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character OLED display or PC using S.T.A.R.T. software |
ETL Listed (UL 325) |
Usage Class I, II, III, IV |
Warranty |
5 year |
Thank you! We will respond to your request within 1 business day.
Oops! An error occurred. Please try again later.