HySecurity StrongArmPark DC 10 Parking and Traffic Control Barrier Arm

StrongArmPark DC 10 cycles up to 10 ft. arms, starting and stopping easily with three field-adjustable open/close speeds (1.5/2/2.5 s). The StrongArmPark DC 10 is an effective method for enforcing site clearance in parking and traffic situations. Boom Sold Separately.
Part Number: SAP-DC-10

$2,903.54 each
OR

Details

HySecurity StrongArmPark DC 10 Parking and Traffic Control Barrier Arm

The StrongArmPark DC 10 is a parking and traffic control barrier-arm operator designed and manufactured by HySecurity. This electromechanical barrier arm operator is designed with reliability and security in mind. Zinc-plated, white-powder coated chassis provides protection for all internal mechanisms. The StrongArm DC-10 runs on a continuous duty cycle and comes with a back-up UPS in case of power failure. Advanced "HyProtect" breakaway bracket arm technology allows for simple arm replacement in case of an attempted security breach. The maximum arm length for this Parking and Traffic Control Barrier Arm is 10 ft. The boom is sold separately with sizes ranging from 8-10 ft.

Features:

  • Max Arm Length: 10 ft.
  • Warranty: 2 Years
  • Finish: Zinc Plated With Powder Coating
  • Field Adjustable Open/Close Time: 3 Speeds: 1.5/2/2.5 s
  • Full Open Angle: 90° ± 10°
  • Handing: Left Handing Standard. Easy To Convert To Right Handing In Field
  • User Controls: Smart DC Controller With 70+ Configurable Settings
  • 32 Character LCD Display And 5 Tact Buttons Or A PC Using S.T.A.R.T. Software

Compatible Arm Design (Boom Sold Separately):

  • Aluminum arm with bumper, lights, HyProtect Breakaway Arm Bracket & Kill Switch
  • Articulating Aluminum Arm With Bumper, Lights, HyProtect Breakaway Arm Bracket & Kill Switch
    • 7ft Clear/8ft Extended
    • 8ft Clear/10ft Extended
    • 9ft Clear/10ft Extended
    • Lights Optional
    • Attachment Plates Available For 1" x 4" Wood And 2.5" Square PVC

    Specifications:

    • Duty Cycle: Continuous
    • Drive: Electromechanical
    • Uninterrupted Power Supply: Two 12V, 8Ah Batteries. Operates For Thousand Plus Cycles After AC Power Loss
    • Field Configurable To Fail Open Or Secure When Batteries Deplete
    • Voltage Input: 115VAC, 3A, 60/50Hz Or 208-230VAC, 1.5A, 60/50Hz
    • Accessory Power: 12VDC and 24VDC 1A Each
    • Temperature Rating: -13° F to 158° F (-25° C to 70° C) - No Heater Necessary
    • Communication: USB, RS-232, RS-485, Ethernet/Fiber Using Optional HyNet™ Gateway Accessory
    • Relays: One Configurable User Relay: 250VAC, 10A Electromechanical
    • Optional Hy8Relay™ For 8 Additional Relay Outputs
    • ETL Listed (UL 325): Usage Class I, II, III, IV
    • Cycle Tested: 2 Million Cycles

    Optional Accessories:

    * Actual UPS cycles depend on accessory power draw, frequency of cycles, battery health, ambient temperature and other conditions.

SKU SAP-DC-10
Max. Arm Length 10 ft.
Operator Type StrongArmPark DC
Duty Cycle Continuous Duty
Manufacturer Nice | HySecurity
UL 325 Usage Class Class I, Class II, Class III, Class IV
Operating Time 1.5/2/2.5 s