HySecurity HydraLift 10F Industrial Hydraulic Vertical Lift Gate Opener - HVG-420-EX-ST
Details
HySecurity HydraLift 10F Industrial Hydraulic Vertical Lift Gate Opener - HVG-420-EX-ST
***This product has been discontinued and replaced with HySecurity HydraLift 20F Industrial Lift Gate Operator.***
The HydraLift 10F is a fast industrial lift gate operator designed and manufactured by HySecurity. This operator is designed a 50 ft long gate, weighing 1,000 lbs, at a rate of 2 ft/s. The HydraLift 10F is suited for areas with snow/ice conditions as well as areas in which space for a slide or swing gate is not readily available. This hydraulic operator is designed to lock securely, preventing unintentional gate closing.
Features:
- Model: HydraLift 10F
- Part #: HVG-420-EX-ST
- Duty Cycle: Continuous
- Horsepower: 5 hp
- Gate Weight Max: 1,000lb
- Gate Height Max: 50 ft.
- Rate of Travel: 2 ft/s
- Temperature Rating: -40° F to 158° F (-40° C to 70° C) No heater necessary
- 1 Phase Power**: 230V 60Hz
- 3 Phase Power**: 208/230/460V or 575V 60Hz; 220/380V 50Hz
- Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory
- User Controls: Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. software.
- Relays: Three configurable user relays:
- one 30VDC
- 3A solid state and two 250VAC
- 10A electromechanical
- Optional Hy8Relay for additional output relays
- Finish: Hot dipped galvanized lifting posts
- Enclosure: HydraSupply: Type 3R, 30w x 42h X 12d inch
- ETL Listed (UL 325): Usage Class III, IV
- Warranty: 5 year
Optional Accessories:
- Hy5B intelligent vehicle detectors
- Hy8Relay - extended relay module provides eight additional programmable relay outputs
- HyNet Gateway for communicating gate system and accessory status in real time via Ethernet/fiber
- Custom post height
- Heater Kit
- Strobe Light
- Traffic Light and more
** Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø, which are special order.
| SKU | HVG-420-EX-ST |
|---|---|
| Max. Gate Length | 50 ft |
| Operator Type | HydraLift |
| UL 325 Usage Class | Class III, Class IV |
| Max. Gate Weight | 1,000 lbs. |
| Input Voltage | 220/230/240 AC (60Hz, 1 Phase), 208 AC (60Hz, 3 Phase), 460/480 AC (60Hz, 3 Phase), 575 AC (60Hz, 3 Phase), 600 AC (60Hz, 3 Phase) |
| Drive Type | Hydraulic |
| Manufacturer | Nice | HySecurity |
| Operating Speed | 2 Feet Per Second |