HySecurity HydraLift 10F UPS Industrial Lift Gate Opener - HYDRALIFT10F-HV

This is a high voltage UPS Battery Backup model HydraLift (208/230 VAC, 50/60 Hz - AC-2-C8)



HydraLift 10F UPS is a fast industrial lift gate opener. Capable of lifting a 1,000 lb gate at a speed of 2 ft/s. The maximum gate length supportable is 50 ft. Post height and gate panel size are customizable, allowing for different gate height and width options. Uninterruptible DC Power Supply 150 allows backup power in case of AC power failure.

** This product has been discontinued and replaced with HySecurity HydraLift 20F UPS Industrial Lift Gate Opener **

Part Number: HYDRALIFT10F-HV

Details

HySecurity HydraLift 10F UPS Industrial Lift Gate Opener - HYDRALIFT10F-HV

** This product has been discontinued and replaced with HySecurity HydraLift 20F UPS Industrial Lift Gate Opener**

The HydraLift 10F UPS is a fast industrial lift gate opener designed and manufactured by HySecurity. This opener is designed a 50 ft long gate, weighing 1,000 lbs, at a rate of 2 ft/s. The HydraLift 10F UPS is suited for areas with snow/ice conditions as well as areas in which space for a slide or swing gate is not readily available. This hydraulic opener is designed to lock securely, preventing unintentional gate closing. The Uninterruptible DC Power Supply 150 allows for backup power in case of AC power failure.

Features:

  • Model: HydraLift 10F
  • Part #: HYDRALIFT10F-HV
  • Duty Cycle: Continuous
  • UPS Battery Voltage: 208-230V 60/50Hz
  • Horsepower: 5 hp
  • Gate Weight Max: 1,000lb
  • Gate Height Max: 50 ft.
  • Rate of Travel: 2 ft/s
  • Temperature Rating: -40° F to 158° F (-40° C to 70° C) No heater necessary
  • 1 Phase Power**: 230V 60Hz
  • 3 Phase Power**: 208/230/460V or 575V 60Hz; 220/380V 50Hz
  • Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory
  • User Controls: Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. software.
  • Relays: Three configurable user relays:
    • one 30VDC
    • 3A solid state and two 250VAC
    • 10A electromechanical
    • Optional Hy8Relay for additional output relays
  • Finish: Hot dipped galvanized lifting posts
  • Enclosure: HydraSupply: Type 3R, 30w x 42h X 12d inch
  • ETL Listed (UL 325): Usage Class III, IV
  • Warranty: 5 year

Optional Accessories:

*The opener’s normal duty cycle and the actual number of gate cycles available from battery depends upon gate resistance to travel, cycle length, battery size, state of charge, and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.

** Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø, which are special order.

SKU HYDRALIFT10F-HV
Max. Gate Length 50 ft
Operator Type HydraLift
UL 325 Usage Class Class III, Class IV
Max. Gate Weight 1,000 lbs.
Drive Type Hydraulic
Manufacturer Nice | HySecurity
Operating Speed 2 Feet Per Second