HySecurity HydraSupply XL Double Acting Universal Wedge HPU Replacement

HydraSupply XL is a heavy duty double acting wedge HPU that regulates cycles of wedge operators. Keeps traffic moving with 3-5 second operation time and 1-2 second FAST EFO deployment time. Easily configure duty cycles with the intuitive Smart Touch Controller.


HySecurity HydraSupply XL Double Acting Universal Wedge HPU Replacement

The HydraSupply XL is a double acting wedge HPU replacement, designed and manufactured by HySecurity. This HPU system allows for complete and reliable control over a Anti-Ram Crash Wedge's operation cycle. This powerful component is capable of thousands of cycles a day at a fluid rate in order to effectively control the flow of traffic while maintaining a high level of security. In case of power failure this model grants up to 3 accumulator backup cycles. The HydraSupply XL is an excellent replacement HPU as well as an intuitive feature improvement option.


  • Duty Cycle: 100/hr depends on wedge
  • Horsepower: 5 hp
  • Drive: Hydraulic
  • Open/Close Time: 3-5 seconds, dependent on wedge specs
  • Emergency Fast Operation: 1-2 seconds
  • Manual Operation: Hand pump (standard)
  • UPS: Standard Model generates multiple cycles from fully charged accumulator
  • Accumulator Backup Cycles; Either normal or EFO: up to 3 cycles with 5 gallon accumulator
  • Accumulator: 5 gallon
  • Reservoir size: 7 gallon
  • Operating Pressure: 2500 psi
  • Max Cylinder Size: up to four 2 x 12 inch cylinders or one 4 x 12 inch cylinder
  • Temperature Rating: -40° to 158° F (-40° to 70° C) or -10° to 158° F (-23° to 70° C) HySecurity specified biodegradable fluid
  • 1 Phase Power: 230V 60Hz 220V 50Hz
  • 3 Phase Power: 208/230/460V; 220/380/440V 50Hz
  • Batteries: Two 8Ah batteries maintain low voltage to the controls for 24 hours after AC power loss
  • Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory
  • User Controls: Smart Touch Controller with 70+ configurable options. Smart Touch keypad and display or a PC using S.T.A.R.T. software.
  • Relays: Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs
  • Enclosure: Type 3R, 91w x 122h x 41d cm (36w x 48h x 16d inch), optional NEMA 4X
  • Finish: Gray polyester powdered paint finish over galvanized steel
  • Electrical Certification: Control Panel certified to UL 508A by ETL
  • Warranty: 5 year

Optional Accessories:

HydraSupplyXLSpecification Sheet HydraSupplyXL Operation Manual
Operator Type HydraSupply XL
Manufacturer Nice | HySecurity
Accessory Type Wedge