HySecurity HydraWedge SM50 UPS Hydraulic Anti-Ram Vehicle Barrier Wedge

Details

HySecurity HydraWedge SM50 UPS Hydraulic Anti-Ram Vehicle Barrier Wedge

The HySecurity HydraWedge SM50 UPS is a high-security anti-ram wedge barrier designed to defend critical access points against vehicular threats. Certified to ASTM M50-P1, IWA 14-1, and PAS 68 standards with zero penetration, the HydraWedge SM50 UPS delivers top-tier crash protection for government, military, and high-risk commercial sites. The system operates reliably even during power outages thanks to its integrated DC Power Supply 120 UPS and high-capacity battery backup. Its hydraulic drive, shallow foundation, fast operation, and compact footprint make it an ideal solution for high-volume security lanes where both high performance and redundancy are required.

Features

• Crash certified to ASTM F2656 M50-P1, IWA 14-1, PAS 68 with zero penetration
• Continuous duty cycle: up to 300 cycles/hour
• Uninterruptible power supply provides hundreds of cycles after AC power loss
• Hydraulic drive system with 2 HP motor and standard hand pump backup
• Emergency fast open/close in 1 second
• Multiple plate width configurations for various lane widths
• Powder-coated steel chassis, salt spray tested to 2,000 hours
• Shallow 300 mm (1 ft) foundation depth reduces installation cost and site disruption
• ETL certified control panel to UL 508A
• 5-year warranty on electronics and hydraulics; 2-year warranty on mechanical wedge

Specifications

• Crash Certification: ASTM F2656 M50-P1, IWA 14-1, PAS 68
• Duty Cycle: 300 cycles/hour
• Drive Type: Hydraulic
• Horsepower: 2 HP
• UPS Backup: Hundreds of cycles via HyCharger DC power supply
• Accumulator Backup: 4 accumulator cycles with 2.5 gallon accumulator
• Open/Close Time: 3 seconds (normal), 1 second (EFO)
• Manual Operation: Hand pump (standard)
• Plate Widths: 2m, 2.5m, 3m, 3.5m, 4m (6.5, 8, 10, 11.5, 13 ft)
• Plate Height (Raised): 1000 mm (3.3 ft)
• Excavation Width: Plate width + 700 mm (27.5 in)
• Excavation Length: 3.7 m (12 ft)
• Excavation Depth: 300 mm (1 ft)
• Wheel Load Capacity: 22,000 lb per wheel (44,000 lb axle load)
• Power Input (1 Phase): 115V 60/50Hz 23A or 208-230V 60/50Hz 11.5A
• Batteries: Two 110 Ah batteries (in separate DC UPS enclosure)
• Temperature Range: -40°F to 158°F (with biodegradable fluid option -10°F to 158°F)
• Communication: RS-232, RS-485, Ethernet/fiber via optional HyNet Gateway
• User Controls: Smart Touch controller with 70+ configurable settings
• Relays: 3 configurable user relays (1 solid-state, 2 electromechanical)
• Enclosure: HydraSupply XL (36w x 48h x 16d inch), optional NEMA 4X DC Power Supply (30w x 30h x 12d inch)
• Finish: Powder coated, 2,000-hour salt spray tested
• Foundation: 300 mm (1 ft) depth; less than 480 lb rebar and 4 cu yds concrete per wedge
• Certification: UL 508A (control panel)
• Warranty: 5 years (electronics & hydraulics), 2 years (mechanical wedge)

*Wedge manufactured in metric scale. Use metric for precision measurements. All imperial measurements rounded to nearest foot.

**300 mm excavation consists of 200 mm reinforcing concrete + 100 mm roadway surface of any material.

***UPS cycles may vary based on accessory load, battery condition, cycle frequency, and temperature.

****115V input requires 30A branch circuit.

HydraWedge Model Comparison

HydraWedge Model Comparison