HySecurity StrongArm Commercial Barrier Gate Opener with Battery Backup (20ft Max Arm)

This industrial-grade barrier gate opener includes an uninterruptible power supply (UPS) to maintain operation during outages. It supports boom arms up to 20 feet and is ideal for commercial and government sites. Please note: Boom arm not included.

1

Barrier Arms

StrongArm 20 UPS

StrongArm; HTG 320‑3 DC ST, Ap Class 1‑4, D.C., 20 ft Max Arm Length

Part: S-HTG-1-61

$10,941.68 each
$10,941.68 each
2

HySecurity Swing Gate Replacement Parts

StrongArm 20 UPS

HySecurity DC 3/4 ‑ 1 HP Power Supply 115 VAC for Automatic Gate Openers

Part: DCP1111

$8,996.44 each
$8,996.44 each
StrongArm 20 UPS

HySecurity DC 3/4 ‑ 1 HP Power Supply 208/230 VAC for Automatic Gate Openers

Part: DCP1211

$8,996.44 each
$8,996.44 each
3

HySecurity Replacement Boom Gate Arms

Details

HySecurity StrongArm Commercial Barrier Gate Opener with Battery Backup (20ft Max Arm)

The HySecurity StrongArm 20 UPS is a rugged, UPS-equipped hydraulic barrier gate operator engineered for critical security installations and uninterrupted lane access. It supports arms up to 20 feet and includes a built-in uninterruptible power supply (UPS), allowing the system to maintain up to 300 cycles during power outages, ensuring operational continuity. This automatic gate arm operator is perfect for industrial compounds, logistics hubs, data centers, and military facilities where secure access and reliability are non-negotiable. Its precision hydraulic drive enables consistent lifting to 90 degrees in just 3 seconds, and the protective enclosure, complete with keyed T-locks and zinc plating, ensures tamper resistance and weatherproofing. Full Smart Touch control and network-ready interfaces make it a seamless fit within advanced perimeter security systems. Barrier arm not included.

Note: This modular barrier opener requires a Gate Opener/Power Supply Unit and ONE of the two DC Power Supply options.

Key Features:

  • HySecurity StrongArm barrier operator with hydraulic drive and 3/4 HP motor
  • Includes uninterruptible power supply (DC Power Supply 60) for backup operation
  • Automatic gate arm operator lifts arm to 90 degrees in just 3 seconds
  • Barrier operator for industrial and military sites requiring reliable access control
  • StrongArm gate with advanced control logic and modular design
  • Traffic control barrier for secured entry at government, utility, and transportation facilities
  • Arm impact safety feature stops motion instantly
  • Weatherproof chassis with keyed T-lock and zinc-plated steel body

Specifications:

  • Max boom arm length: 20 ft (center yoke mount), 18 ft (side mount)
  • Arm material support: Aluminum (up to 20 ft), Fiberglass (up to 16 ft), Wood (up to 14 ft)
  • Open/close speed: 3 seconds open / 4 seconds close
  • Duty cycle: 2,000 cycles/day
  • Operating temperature: -40 degrees F to 158 degrees F (no heater required)
  • Power input (single phase): 115/208/230V 60 Hz or 110/220V 50 Hz
  • Power input (three phase): 208/230/460/575V 60 Hz or 220/380V 50 Hz
  • Communication: RS-232, RS-485, Ethernet/fiber via optional HyNet Gateway
  • User interface: Smart Touch Controller with 70+ configurable settings, PC integration via S.T.A.R.T. software
  • Relays: 3 configurable relays (1 solid state, 2 electromechanical), optional Hy8Relay for 8 additional outputs
  • Finish: Zinc-plated, yellow powder-coated chassis
  • UL listed: Usage Class I, II, III, IV
  • Warranty: 5 years

Note: Arms 20 ft or longer require counterweights. Unit only - boom arm not included.

StrongArm Model Comparison

Model StrongArm 14F StrongArm 20 UPS StrongArm 28 UPS StrongArm DOT 28 UPS StrongArm 36 UPS
Arm Length Max. Up to 14 ft Up to 20 ft *
Side mount up to 18 ft
Up to 28 ft * Up to 28 ft Up to 36 ft*
Duty Cycle 2,000 cycles/day*
Open/Close Time 2 seconds to open; 3 seconds to close 3 seconds to open; 4 seconds to close 5 seconds to open; 6 seconds to close 5 seconds to open; 6 seconds to close 8 seconds to open; 8 seconds to close
UPS Battery Backup Cycles Optional 230V AC Power Supply w/HyInverter AC DC Power Supply w/HyCharger
(up to 300 cycles)
DC Power Supply w/HyCharger
(up to 300 cycles)
DC Power Supply w/HyCharger
(up to 300 cycles)
DC Power Supply w/HyCharger
(up to 300 cycles)
User Controls Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character OLED display or PC using S.T.A.R.T. software
ETL Listed (UL 325) Usage Class I, II, III, IV
Warranty 5 year
Prefer to Call? (888) 378-1127

Questions about part number STRONG-ARM-20-UPS?

Required Fields *

Name *

Email *

Phone

My Questions *

SKU STRONG-ARM-20-UPS
Operator Type StrongArm
UL 325 Usage Class Class I, Class II, Class III, Class IV
Input Voltage 24 AC, 110/115/120 AC (60Hz, 1 Phase), 220/230/240 AC (60Hz, 1 Phase), 240 AC (60 Hz, 3 Phase), 208 AC (60Hz, 1 Phase), 208 AC (60Hz, 3 Phase), 220/230/240 AC (60Hz, 3 Phase), 230 AC (50Hz, 1 Phase)
Specification Sheet Download PDF file