Have a question? Give us a call at (800) 878-7829

HySecurity SwingRiser 19 UPS Industrial Swing Gate Operator - SWINGRISER19-HV

HySecurity SwingRiser 19 UPS Industrial Swing Gate Operator - SWINGRISER19-HV
$26,327.13

This is a high voltage UPS Battery Backup model SwingRiser (208/230 VAC, 50/60 Hz - AC-2-C8).



SwingRiser 19-Twin is capable of cycling a 1,600 lb gate in 19 seconds. Continuous cycling powered by hydraulic automation. 80 inch SwingRiser posts are highly configurable allowing for a perfect fit for any situation. Easy configuration and control with Smart Touch Controller. Contains Uninterruptible Power Supply in case of AC power failure.
 
OR

Call (800) 878-7829

Details

The HySecurity SwingRiser 19 UPS is an industrial swing gate operator designed and manufactured by HySecurity. SwingRiser 19 is capable of elegant cycling of gate leaves weighing up to 1,600 lb in just 19 seconds. Graceful and elegant gate operation is powered by hydraulic drive. SwingRiser posts are 80 inches tall, and can be configured to be left/right handed and inward/outward swinging. Separate HydraSupply located within 100 ft of the operator contains hydraulic power supply and Smart Touch Controller. This model contains the Uninterruptible Power Supply that will provide up to 100 cycles upon AC power failure.

 

Features:

  • Model: SwingRiser 19 UPS
  • Part #: SWINGRISER19-HV
  • Duty Cycle: Continuous
  • UPS Battery Voltage: 208-230V 60/50Hz
  • Horsepower: 1hp
  • Drive: Hydraulic
  • Gate Length Max: up to 16 ft wide
  • Gate Weight Max: 1,600 lb
  • Open/Close Time: 19 seconds
  • Temperature Rating: -40º to 158º F (-40º to 70º C) No heater necessary
  • 1 Phase Power: 115/208/230V 60Hz; 110/220V 50Hz **
  • 3 Phase Power: 208/230/460V or 575V**; 60Hz, 220/380/440V 50Hz
  • Communication: RS-232, RS-485, Ethernet/fiber using optional HyNet™ Gateway accessory
  • User Controls: Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. Software.
  • Relays: Three configurable user relays:
    • one 30VDC
    • 3A solid state and two 250VAC
    • 10A electromechanical
    • Optional Hy8Relay for 8 additional relay outputs
  • Finish: Zinc flame sprayed
  • Enclosure: HydraSupply: Type 3R, 30w x 42h x 12d inch (76w x 107h x 30.5d cm)
  • ETL Listed (UL325): Usage Class I, II, III, IV
  • Warranty: 5 year

 

Optional Accessories:

 

*The operator’s normal duty cycle and the actual number of gate cycles available from battery depends upon gate resistance to travel, cycle length, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.

** Refer to Installed Options on pricing for all 50Hz voltages and 575V 3Ø, which are special order.

† 115V requires a 30A branch circuit. Choose voltage with care as chargers are not field convertible.

 

Additional Information

SKU SWINGRISER19-HV
Manufacturer HySecurity Gate Operators, Inc.
Operator Type SwingRiser
Usage Class I, II, III, IV
Max. Gate Weight 1,600 lbs.
Max. Gate Length 16 ft
Operator HP 1 HP
Open/Close Time 19 Sec.

HySecurity SwingRiser 19 UPS Industrial Swing Gate Operator - SWINGRISER19-HV